Board Quivers

Harry from www.Surfsimply.com 6’0 x 185 lbs, then from left to right: – 6’1 x 18 3/4 x 2 1/4, 28.5 liters Round pin, single concave, thruster Step-up – 6’0 x 19 x 2 3/8, 27 liters Round Diamond, single to double 5 boxes, quad fins set inboard Standard shortie – 5’10 x 19 3/4 x 2 3/8, 29 liters Double wing pin, single to double 5 boxes, quad fins on rail Small wave ripper – 5’10 x 21 1/4 x 2 5/8, lots of liters Big swallow, Flat to Vee Keel fin twin All these boards were shaped by Paul Walters of Black and White Surfboards.

Cornish photographer Karl Mackie took this photo of his Australian friend Tim Crabtree when they had a Cornish summer staycation in 2011, when rather than going off on a trip they stayed put at home and shaped a stack of boards each.

Check out Loren and Aubrey @ http://www.surferswithoutborders.org they are a positive force in this world.

All Rozo

Deus fixture, Steve ‘Monty’ Montell, pitched up yesterday in his VW Combi loaded to the brim with surfboard history. He unloads his precious cargo and proceeds to arrange them on the lawn, without even a hint of his motives. Once happy with his positioning he shouts “Have i got the most diverse quiver in Bali or what!?”A pretty bold claim on the part of the surf collector, but you know what? I’m pretty sure he’s right. A spread of single fin, twin, Thruster and Quad boards from the 60′s, 70′s, 80′s, 90′s and 00′s is a pretty hard combo to beat. Shapers from different eras and styles, a few to jot down are…Bob McTavish, Peter McCabe, Bill Kaz, Terry Fitzgerald, Micky-T, M.R., Gary Birdsall, Joel Tudor, Geoff McCoy, Greg Clough, and Kim ‘The Fly’ Bradley.

Rental boards at Lourdes Place – Saladita Point in La Saladita, Mexico. Check out their set up at http://wavecation.com/Lourdes-saladita

Mark Richards and Stinger Quiver Plus a Twin Fin, 1977. Photograph : Hugh McLeod Mark’s quiver of pictue boards, shaped by Ben Apia and Dick Brewer. Airbrush sprays by Albert Dove.

The two Buddha boards I surf in Bali and occasionally around home when it gets up a bit. Mitchell lived and shaped in Indo for a few years – he has a really good take on the surf up there. Both the 6’10″ and 7’2″ work really well. I usually take the 7’2″ out at Sanur when it gets up to double over-head. It’s great on the take offs and has enough speed to race the inside section. The 7’10″ cloud board is fun on the points around where I live when it’s 2-3 feet. – light and easy to turn. The Outer Island deep blue flex works well when it gets up a bit – nice and quick off the bottom. The red eye and flower board are good fun on 3-6 foot days.

http://www.vallasurfboards.com.au

#1 – 9’0 Bob Davie mal- This was a xmas present from Ange(my wife) and Dad. I love it, the kids love it. Good for all… #2- 7’0 Soft Top. Good learning board for the young’ns ‘cept for the nipple removing blue deck. Hand-me-down gift from Billy and Norma Bott for the kids. #3 – 5’4 Saltwater, Bob Davie, Twin fin- I bought this off Pete Andy about 10yrs ago after he aquired it as a trade in the factory. #4 – 7’2 Byrning Spears, Bob Davie. This was a gun Dad shaped for my brother Chrissy. It was sold to a local guy and I bought it back off him a few years later. The front 12″ is completely sunk in after I (dumbly) left it in the car on a scorching summer day. The back window acted like a magnifyin glass and fried it good an proper. Still gutted on my stupidity. #5 – 5’0 Bob Davie/Daniel Davie shape. This is my son Xavier’s 1st birthday present. Dad and I teamed up and made a bday present he’ll remember and keep forever. Sure beats a quickly forgotten throwaway rattle. #6 – 6’0 Walden. I scored this off a trailor that was heading for the dump. It had been backed over by a car and was in two peices and a touch squashed. I fixed it up and it is like the perfect tiny mal for the kids to ride. I have even had a few blats on it and it’s fun to ride. #7 – 6’10 Single fin. Rodney Dahlberg shape (With Bob Davie logo). Scored this off Trade Me for $50. Needs a little TLC but a mean score nonetheless. #8 – 6’3″- Pete Anderson Semi-Gun. A step up board for when it’s around 5ft. #9 – 5’9 – Ray Finlay – Keel Fin Fish. Great board for small waves or down the line walls. Not the best when it gets sucky but has its place in certain conditions. #10 – Some random board bought from a secondhand shop for $40. #11 – 6’1 Rusty. I scored this off Luke Harwood after he snapped it on the bar. I put it back together, and put a Yugi-oh cartoon character on it and gave it to my step-son for his 5th birthday. #12 – 6’6 Pat Rawson gun. This was a wedding present from my good mate Larry Loggins. Pat Rawson is a legendary Hawaiian shaper and this board is one of my pride and joys in my collection. (shot Larry and Elanore!!). #13 – 6’9 Nev Hines Single Fin. Scored this off Bruce Hoffman. He’s yet to tell me what I owe him for it. Me, Braedon, Rangi and a few others have all givin it a whirl and it goes really well. #14 – 5’8 Pete Anderson ‘DRAC’. Super fun fish, has a mega deep concave and turns on a dime. Tore the ligaments in both my knees riding this 3months ago. Turned on the dime a little to quickly for my aging knees. #15 – 5’11 COLE (Aviso) – Made of carbon and totally hollow. It has thruster and four-fin options, I found it goes way better as a quad. Makes funny noises when it hits chop(like a dinghy). Strong as fark. You can punch it as hard as you want and not a mark or dent. #16 – 5’8 Bob Davie Twin Fin- Did my first ever 360 and revereses on this puppy. #17 – 6’1 Pete Anderson rounded pin. I’m way to heavy for this board now but cant bring myself to part with it as it was the board I got my cover of New Zealand Surming Magazine on… Holding onto it for silly sentimental reasons. #18 – 5’8 Shaped by me. I made this when i was working and shaping at Fresh Squeezed in AK. I made it after the Lost video 5’5 x 19 1/4 came out. From memory it was pretty good for airs. #19 – 5’8 Keel Fish with stabiliser. I shaped this a few years back. Was a bit of an experiment. Went ok. #20 -5’10 Bob Davie Twin Fin. A modern twin fin I got Dad to shape us a few years back…. (missing from photo are 5 more oldschool boards that are restoring projects….)

My East Coast Quiver for knee to head high is Channel Island’s “The Pod!” (5’8,19 3/4, 2 3/8 swallow tail). When it’s head to 1 ft. overhead I grab “The Proton!” (6’1, 18 3/8, 2 3/8 small squash tail). When the rare days of 1 ft overhead to as big as it can get in Delaware arrives, I wax up the “Black Beauty!” (6’3, 18 3/4, 2 1/2 round pintail).

Surfboards should be surfed, not hung on walls.

Proctor Surfboards

11’4″ Rozo 9’4″ Rozo 9’4″ Rozo 9’6″ C.C. Rider 8’4″ Rozo Mexico gun 7’6″ Hansen Master 76′ 1967 6’7″ Mystic 6’5″ Mystic 6’4″ Firewire Spitfire 5’8″ Plastic Fantastic twin fin 1970?